Dongguan Huitong Automatic Machinery Technology Co., Ltd
Title
  • Title
  • جميع
معلومات عن الشركة
الخدمة عبر الإنترنت
http://ar.medicalmaskmachines.comمسح لزيارة
KN95 MASK MACHINE

: Product parameters and technical characteristics

:

Technical parameters of automatic folding mask integrated machine:


:,, 3-6PP .,,,,,,,3M9001.9002.,FFP1.FFP2.N95,,,.

The fully automatic folding mask machine is a fully automatic machine for folding mask production line. It uses ultrasonic technology to weld 3-6 layers of PP non woven fabric, activated carbon and filter materials, non-woven fabric welding, ear band welding, printing, folding Edge banding and rolling cutting integrated automatic folding mask production line, can process 3M9001, 9002 and other folding masks. Depending on the raw materials used, the masks produced can meet different standards such as FFP1, FFP2, N95, etc. No manual operation is required during the whole process. All are produced by mechanization, and the finished products are produced.

:

1. ,

2. PLC ,.,..,.

3. ,,,.

4.PLC ,.

Product configuration and features:

1. The machine is highly automated and no manual operation is required

2. Through PLC programming control, it can achieve mask embossing, ear strap welding, half-folding, trimming, built-in nose bridge, and one-time molding.

3. The special production process has clear lines and is not deformed during production, which can minimize the waste of materials and effectively guarantee the quality of the finished products.

4. PLC control system is adopted, and pneumatic components are selected from international brands.

:

→→→→→→

work process:

Nose bridge feeding ultrasonic welding ear belt welding non-woven fabric folding ultrasonic welding cutting material conveyor belt device to send out the finished mask

1.:


Item

DJ-KCX37H

Productivity

60PCS/MIN

()

Adult Size

145*105mm



Drive method

Servo motor

control panel

() Human-machine interface (touch screen) and buttons

Power supply

Power supply:220V 50/60HZ Power:7.5KW

Ultrasonic frequency

15/20KHz

Air pressure

0.6Mpa

Compressed air

0.5~0.7MPa 500L/Min Use flow rate

Use environment

10~35,5-35%HR ,.,(10)Temperature 10 ~ 35 , humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanness not less than 100,000)

Equipment size

L11500 * W1900*H1300mm(. Including conveyor rack and material rack)

weight

2500KG

outer diameter of coil material (mm) inner diameter of cartridge (mm) weight

2.:material specification suitable for the equipment:

Type

hanging shaft quantity

(mm)

width (mm)

(mm)

Outer diameter of coil material (mm)

(mm)

Inner size

weight

Fabric

4

260

Φ600

Φ76.2


Nose clip

1

3-5

Φ400



ear-loop


5

--

--

--

3.:

Material

(mm)width

weight


Outer non-woven fabric

260mm

50g


Hot air cotton

260mm

60g


Meltblown cloth

260mm

50g

-

Inner non-woven fabric

260mm

30g


Nose line dual core

5mm Two core


Thickness 0.5

Earband

5mm Wide Round Band



4.:

1. :, ,,,,,,,,.

2.:,,,.

3.:SKD11.., ,,,,,,58-60HRC.

4.:15K,,,SKD11,().

5.:CNC,,,,,,,,.

1. The unwinding position of the machine: the unwinding device of the machine adopts mechanical tension control, which can maintain the consistency of any operation of the machine several times, including the acceleration, deceleration and uniform speed of the machine. Even in the case of emergency shutdown, he It can also be consistent to ensure that the material will not be displaced, deformed, wrinkled, etc. in the case of emergency shutdown.

2. Nose bridge of the body: The nose bridge feeding device adopts a motor pulse transmission system to achieve positioning, control the speed, and the position accuracy is very accurate.

3. Mould material: SKD11 is used for the grinding tool and cutter of this machine. It is a general purpose cold working die steel with high wear resistance and toughness. It is a kind of steel with good strength and excellent wear resistance. The toughness and heat resistance balance are very good. Traditional abrasive steel is better and better. In recent years, with the development of isotropic products, it has increasingly developed into high toughness and other aspects. It can make the die life longer, more stable, and the hardness is 58-60HRC.

4. Ultrasonic: This machine adopts high-power 15K ultrasonic, the welding effect is better and stronger, the ultrasonic welding head adopts SKD11 high wear-resistant abrasive steel, and the surface of the ultrasonic welding head is rubbed with the abrasive tool (tens of thousands of times per second) Frequency vibration) to form fusion between molecular layers.

5. Accessories steel aluminum concentrate: All the parts of this machine are CNC precision processed, and the plating process improves wear resistance, heat resistance, conductivity, reflection, corrosion resistance, beautiful appearance, no rust, more durable.

اشترك في النشرة الإلكترونية:
الحصول على التحديثات، خصومات وعروض خاصة وجوائز كبيرة!

متعدد اللغات:
حق النشر © 2021 Dongguan Huitong Automatic Machinery Technology Co., Ltdحق الطبعة الملكية
التواصل مع مزود؟المزود
Eric Mr. Eric
ماذا يمكنني أن أفعل لك؟
الاتصال المورد